What are the steps to install the roof rack?
Hits:Update:2022-09-01 11:09:15
Install the roof rack as follows: 1. Thoroughly clean the top of the car. If there are no reserved screws on the roof, only glued luggage racks can be installed. Before installing the adhesive roof rack, wipe the roof around the area where it needs to be glued, first with a damp cloth to remove dust, then with a dry cloth. It would be better if you can wash the car before installing it.
2. Find the right position for symmetry. Before sticking the luggage rack, you must find a suitable sticking position, and the front, back, left and right should be symmetrical, so that it will look better after sticking. If you are not sure, you can go directly to the 4S shop and ask a professional master to paste it.
3. Tear off the adhesive at the bottom of the luggage rack and stick it firmly. After cleaning the roof, slowly peel off the adhesive on the luggage rack, then quickly stick it to the roof, and press hard for more than 10 minutes to let the adhesive exert its adhesive force. Pay attention to sticking the luggage rack as much as possible when the ambient temperature is higher or the sun is better, the effect will be better.
|